The Demo site for our new HL7 Version 2+ (plus) Standard
visit the hl7 website

Draft Website - For Review Purposes Only

OH4 - Combat Zone Work Segment

The OH4 segment contains the date range an individual has worked in what is considered a combat or hazardous duty zone; both civilian and military.

The intent is for the segment to be allowed to repeat within a message definition to enable a combat zone history for the patient.

Examples:

A person/ may have worked in a combat zone for 2 years, followed by 3 years where there was no combat zone work, returning to combat zone work for another 2 years. This would be reflected as two Combat work segments documenting the date ranges for the 2 periods when the combat zone work occurred.

HL7 Attribute Table - OH4 - Combat Zone Work segment
Seq# DataElement Description Must Implement Flags Cardinality Length C.LEN Vocabulary DataType
OH4
1 03543 Set ID SHALL [1..1]
SI
2 00816 Action Code [0..1] [2..2]
0206 Segment Action Code
ID
3 03544 Combat Zone Start Date SHALL [1..1]
DT
4 03545 Combat Zone End Date [0..1]
DT
5 03524 Entered Date [0..1]
DT
6 02449 Combat Zone Unique Identifier [0..1]
EI

OH4-1: Set ID (SI) 03543

Definition: This field contains the sequence number used to identify the OH4 segment instances in message structures where the OH4 segment repeats. For the first occurrence of the segment, the sequence number shall be one, for the second occurrence, the sequence number shall be two, etc.

OH4-2: Action Code (ID) 00816

(Definition from OH1.2 in Ch. 3)

Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from OH2.2 in Ch. 3)

Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from OH3.2 in Ch. 3)

Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from OH4.2 in Ch. 3)

Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from ORC.35 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when either ORC-2 and/or ORC 3 is valued with a unique identifier in accordance with Chapter 2, Section 2.10.4.2.

(Definition from OBR.55 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when either an OBR-2 and/or OBR-3 is valued with unique identifier in accordance with Chapter 2, Section 2.10.4.2.

(Definition from IPC.10 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when the combination of IPC-1, IPC-2, IPC-3, and IPC-4 represents a unique identifier according to Chapter 2, Section 2.10.4.2.

(Definition from BPX.22 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an BPX is uniquely identified sufficiently within the specific implementation using BPX-17 or BPX-6 as agreed to by the trading partners and in accordance with Chapter 2, Section 2.10.4.2.

(Definition from BTX.21 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an BTX is uniquely identified sufficiently within the specific implementation using BTX-20 or BTX-3 as agreed to by the trading partners in accordance with Chapter 2, Section 2.10.4.2.

(Definition from DON.34 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an DON is uniquely identified sufficiently within the specific implementation using DON-1 in accordance with Chapter 2, Section 2.10.4.2.

(Definition from BUI.13 in Ch. 4)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an BUI is uniquely identified sufficiently within the specific implementation using BUI-2 in accordance with Chapter 2, Section 2.10.4.2

(Definition from RXV.22 in Ch. 4A)

Definition: The intended handling by the receiver of the infusion order is represented by this segment. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from CDO.2 in Ch. 4A)

Definition: The Action Code indicates whether the cumulative dosage segment is intended to be added, deleted, updated, or did not change. If the field is not valued in any CDO segments for the order, the segments are considered to have been sent in snapshot mode. If some but not all CDO segments for the order do not have the action code valued, the default value is Add. Refer to HL7 Table 0206 - Segment Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from OBR.55 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an either OBR-2 and/or OBR-3 is valued with unique identifier in accordance with Chapter 2, Section 2.10.4.2.

(Definition from OBX.31 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an OBX-21 is valued in accordance with guidance in Chapter 2, Section 2.10.4.2.

(Definition from SPM.35 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when an SPM-2 or SPM-31 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.

(Definition from PRT.2 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/goal action code for valid values.

(Definition from CSR.17 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when CSR-1 and CSR-4, or CSR-2 and CSR-5 are valued as agreed to by the trading partners in accordance with the guidance in Chapter 2, Section 2.10.4.2.

(Definition from CTI.4 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when CTI-1 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.

(Definition from SHP.12 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when SHP-1 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.

(Definition from PAC.9 in Ch. 7)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.

The action code can only be used when PAC-2 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.

(Definition from GOL.1 in Ch. 12)

Definition: The action code field gives the intent of the problem or goal. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from PRB.1 in Ch. 12)

Definition: This field contains the intent of the message. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from PTH.1 in Ch. 12)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.

(Definition from DEV.1 in Ch. 17)

Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/goal action code for valid values.

OH4-3: Combat Zone Start Date (DT) 03544

Definition: This field asserts when the combat zone duty began.

OH4-4: Combat Zone End Date (DT) 03545

Definition: This field asserts when the combat zone duty ended. If combat zone duty is current, Combat Zone End Date should be empty.

OH4-5: Entered Date (DT) 03524

(Definition from OH2.3 in Ch. 3)

Definition: This field records the date that the information was entered into the patient record.

(Definition from OH4.5 in Ch. 3)

Definition: This field records the date that the information was entered into the patient record.

OH4-6: Combat Zone Unique Identifier (EI) 02449

Definition: This field contains a value the uniquely identifies a single combat zone for a person.