The Cumulative Dosage segment allows for the communication of cumulative dosage limits that administrations against this medication order should stay within. As part of one of the pharmacy messages, one may want to indicate one or more limits that apply, e.g., limit for the duration of the order, lifetime limit, or weekly limit.
| Seq# | DataElement | Description | Must Implement | Flags | Cardinality | Length | C.LEN | Vocabulary | DataType |
|---|---|---|---|---|---|---|---|---|---|
CDO
|
|||||||||
1
|
03430 | Set ID – CDO | [0..1] | [1..4] | SI | ||||
|
2
|
00816 | Action Code | [0..1] | [2..2] | ID | ||||
|
3
|
03397 | Cumulative Dosage Limit | [0..1] | CQ | |||||
4
|
03398 | Cumulative Dosage Limit Time Interval | [0..1] | CQ | |||||
Definition: For the first cumulative dose specification transmitted, the sequence number shall be 1; for the second cumulative dose, it shall be 2; and so on.
(Definition from OH1.2 in Ch. 3)
Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from OH2.2 in Ch. 3)
Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from OH3.2 in Ch. 3)
Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from OH4.2 in Ch. 3)
Definition: This field contains a code defining the action to be taken for this segment. It allows this segment to be sent to delete or update, for example, previously sent information. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from ORC.35 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when either ORC-2 and/or ORC 3 is valued with a unique identifier in accordance with Chapter 2, Section 2.10.4.2.
(Definition from OBR.55 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when either an OBR-2 and/or OBR-3 is valued with unique identifier in accordance with Chapter 2, Section 2.10.4.2.
(Definition from IPC.10 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when the combination of IPC-1, IPC-2, IPC-3, and IPC-4 represents a unique identifier according to Chapter 2, Section 2.10.4.2.
(Definition from BPX.22 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an BPX is uniquely identified sufficiently within the specific implementation using BPX-17 or BPX-6 as agreed to by the trading partners and in accordance with Chapter 2, Section 2.10.4.2.
(Definition from BTX.21 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an BTX is uniquely identified sufficiently within the specific implementation using BTX-20 or BTX-3 as agreed to by the trading partners in accordance with Chapter 2, Section 2.10.4.2.
(Definition from DON.34 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an DON is uniquely identified sufficiently within the specific implementation using DON-1 in accordance with Chapter 2, Section 2.10.4.2.
(Definition from BUI.13 in Ch. 4)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an BUI is uniquely identified sufficiently within the specific implementation using BUI-2 in accordance with Chapter 2, Section 2.10.4.2
(Definition from RXV.22 in Ch. 4A)
Definition: The intended handling by the receiver of the infusion order is represented by this segment. Refer to HL7 Table 0206 – Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from CDO.2 in Ch. 4A)
Definition: The Action Code indicates whether the cumulative dosage segment is intended to be added, deleted, updated, or did not change. If the field is not valued in any CDO segments for the order, the segments are considered to have been sent in snapshot mode. If some but not all CDO segments for the order do not have the action code valued, the default value is Add. Refer to HL7 Table 0206 - Segment Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from OBR.55 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an either OBR-2 and/or OBR-3 is valued with unique identifier in accordance with Chapter 2, Section 2.10.4.2.
(Definition from OBX.31 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an OBX-21 is valued in accordance with guidance in Chapter 2, Section 2.10.4.2.
(Definition from SPM.35 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when an SPM-2 or SPM-31 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.
(Definition from PRT.2 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/goal action code for valid values.
(Definition from CSR.17 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when CSR-1 and CSR-4, or CSR-2 and CSR-5 are valued as agreed to by the trading partners in accordance with the guidance in Chapter 2, Section 2.10.4.2.
(Definition from CTI.4 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when CTI-1 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.
(Definition from SHP.12 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when SHP-1 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.
(Definition from PAC.9 in Ch. 7)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0206 - Segment Action Code for valid values.
The action code can only be used when PAC-2 is valued in accordance with the guidance in Chapter 2, Section 2.10.4.2.
(Definition from GOL.1 in Ch. 12)
Definition: The action code field gives the intent of the problem or goal. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from PRB.1 in Ch. 12)
Definition: This field contains the intent of the message. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from PTH.1 in Ch. 12)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/Goal Action Code in Chapter 2C, Code Tables, for valid values.
(Definition from DEV.1 in Ch. 17)
Definition: This field reveals the intent of the message. Refer to HL7 Table 0287 – Problem/goal action code for valid values.
Definition: The Cumulative Dosage indicates the total dosage that may be administered within the scope of this order or within the interval indicated in CDO-4 Cumulative Dosage Time Interval, if supplied
Definition: The Cumulative Dosage Time Interval indicates the interval over which the cumulative dosage in CDO-3 Cumulative Dosage Limit is measured. If this field is not valued, the Cumulative Dosage Limit applies to the scope of the order.
Refer to HL7 Table 924 – Cumulative Dosage Limit UoM in Chapter 2C, Code Tables, for a list of suggested values, including applicable values from UCUM.
®© HL7.org 2019+. HL7 v2+ generated on December 11, 2020
Links:
Version History
|
Propose a change
|
License
The Demo site for our new HL7 Version 2+ (plus) Standard
