The Demo site for our new HL7 Version 2+ (plus) Standard
visit the hl7 website

Draft Website - For Review Purposes Only

RXC - Pharmacy/Treatment Component Order Segment

If the drug or treatment ordered with the RXO segment is a compound drug OR an IV solution, AND there is not a coded value for OBR-4-universal service ID, which specifies the components (base and all additives), then the components (the base and additives) are specified by two or more RXC segments. The policy of the pharmacy or treatment application on substitutions at the RXC level is identical to that for the RXO level.

HL7 Attribute Table - RXC - Pharmacy/Treatment Component Order Segment
Seq# DataElement Description Must Implement Flags Cardinality Length C.LEN Vocabulary DataType
RXC
1 00313 RX Component Type SHALL [1..1] [1..1] ID
2 00314 Component Code SHALL [1..1] CWE
3 00315 Component Amount SHALL [1..1] NM
4 00316 Component Units SHALL [1..1] CWE
5 01124 Component Strength [0..1] NM
6 01125 Component Strength Units [0..1] CWE
7 01476 Supplementary Code [0..*] CWE
8 01671 Component Drug Strength Volume # [0..1] 5 NM
9 01672 Component Drug Strength Volume Units [0..1] CWE
10

03314 Dispense Amount MAY
True:
False:
C
[1..1]
[0..1]
NM
11 03315 Dispense Units MAY
True:
False:
C
[1..1]
[0..1]
CWE

RXC-1: RX Component Type (ID) 00313

Definition: Refer to HL7 Table 0166 – RX Component Type in Chapter 2C, Code Tables for valide values.

For the non-IV case, the "B" value may still apply. For example, if a custom dermatologic salve is being prepared, the "B" item might be a standard base ointment into which other components are mixed.

The amount of the "base" specified in the "B" segment(s) is defined to be the quantity into which amounts specified in the "A" components are mixed. Thus the RXC segments as a group define the "recipe" for a particular amount (defined by the base segment(s)). The give amount, as defined in the RXO, does not need to correspond to this base amount. For example, the RXC segments may specify a recipe for a liter of a standard type of saline with 1 gram of a particular antimicrobial, while the give amount (from the RXO) may specify the administration of 2 liters of this IV-solution every 24 hours.

The amount specified in each "A" segment is defined to be the quantity to be added to the amount of the base as specified in its RXC segment.

If any "base" components are present then these should be transmitted first. The first "base" component in the transmission should be considered the "primary base" if such a distinction is necessary. Similarly, the first "additive" in the transmission should be considered the "primary additive" if such a distinction is necessary.

RXC-2: Component Code (CWE) 00314

Definition: This field is equivalent to OBR-4-universal service ID. It defines the base or component in the same manner as the give and dispense codes. As with the give and dispense codes, it may contain text only, code only, text + code, or text + code + units (implied or explicit). As with the give and dispense codes, if RXC-4-component units is present, this overrides the units implied by the code. If only text is present, the pharmacy or treatment application must include a manual review or reentering of the component drug or treatment. Refer to Table 0697 - Component Code in Chapter 2C for valid values.

RXC-3: Component Amount (NM) 00315

Definition: This field identifies the amount of this component to be added to the specified amount of the base.

RXC-4: Component Units (CWE) 00316

Definition: This field identifies the units for the component amount. If present, this overrides the units implied by RXC-2-component code. This must be in simple units that reflect the actual quantity of the component being added. It does not include compound units. Refer to Table 0698 - Component Units in Chapter 2C for valid values.

RXC-5: Component Strength (NM) 01124

Definition: Use when RXC-2-component code does not specify the strength. This is the numeric part of the strength, used in combination with RXC-6-component strength units.

RXC-6: Component Strength Units (CWE) 01125

Definition: Use when RXC-2-component code does not specify the strength. This is the unit of the strength, used in combination with RXC-5-component strength. Refer to Table 0699 - Component Strength Units in Chapter 2C for valid values.Note: These units can be a "compound quantity;" i.e., the units may express a quantity per unit of time. For example, micrograms per hour (micg/h) is an acceptable value. These compound units are contained in the ISO+ table. See Chapter 7 for full definition of ISO+ units.

RXC-7: Supplementary Code (CWE) 01476

(Definition from RXO.24 in Ch. 4A)

This field accommodates the identification of any codes that might be associated with the pharmaceutical substance. Common codes include: the Generic Product Identifier (GPI), Generic Code Number_Sequence Number (GCN_SEQNO), National Drug Code (NDC). Refer to Table 0762 - Supplementary Code in Chapter 2C for valid values.

(Definition from RXC.7 in Ch. 4A)

Definition: This field accommodates the identification of any codes that might be associated with the pharmaceutical or other treatment substance. Common codes include: the Generic Product Identifier (GPI), Generic Code Number_Sequence Number (GCN_SEQNO), National Drug Code (NDC). Refer to Table 0700 - Supplementary Code in Chapter 2C for valid values.

(Definition from RXE.31 in Ch. 4A)

Definition: This field accommodates the identification of any codes that might be associated with the pharmaceutical substance. Common codes include: the Generic Product Identifier (GPI), Generic Code Number_Sequence Number (GCN_SEQNO), National Drug Code (NDC). Refer to Table 0727 - Supplementary Code in Chapter 2C for valid values.

(Definition from RXD.25 in Ch. 4A)

Definition: This field accommodates the identification of any codes that might be associated with the pharmaceutical substance. Common codes include: the Generic Product Identifier (GPI), Generic Code Number_Sequence Number (GCN_SEQNO), National Drug Code (NDC). Refer to Table 0710 - Supplementary Code in Chapter 2C for valid values.

RXC-8: Component Drug Strength Volume (NM) 01671

Definition: This numeric field defines the volume measurement in which the drug strength concentration is contained. For example, Acetaminophen 120 MG/5ML Elixir means that 120 MG of the drug is in a solution with a volume of 5, which would be encoded in RXC-5, RXC-6, RXC-8 and RXC-9 as

RXC|||||120|mg^^ISO||5|ml^^ISO ...<cr>

RXC-9: Component Drug Strength Volume Units (CWE) 01672

Definition: This field indicates the volumetric unit associated with RXC-8 Component Drug Strength Volume. See example in RXC-8. Refer to Table 0701 - Component Drug Strength Volume Units in Chapter 2C for valid values.

RXC-10: Dispense Amount (NM) 03314

Definition: This field contains the amount to be dispensed as encoded by the pharmacy or treatment supplier.

RXC-11: Dispense Units (CWE) 03315

Definition: This field contains the units for the dispense amount as encoded by the pharmacy or treatment supplier. This field is required if the units are not implied by the actual dispense code. This must be in simple units that reflect the actual quantity of the substance dispensed. It does not include compound units. Refer to Table 0703 - Dispense Units in Chapter 2C for valid values.