The sterilization configuration segment contains information specific to configuration of a sterilizer or washer for processing sterilization or decontamination loads.
|1||02087||Number Of Decontamination/Sterilization Devices||=||[0..1]||2||NM|
|2||02088||Labor Calculation Type||[0..1]||CWE|
|6||02091||Device Model Name||=||[0..1]||2||ST|
Definition: The number of decontamination/sterilization devices recognized by the instrument-tracking system. The decontamination/sterilization device(s) would configure itself based on the data in this message.
Definition: The method at which labor is calculated for use in tracking employee productivity. Refer to User-defined Table 0651 –Labor Calculation Type in Chapter 2C, Code Tables, for suggested values.
Definition: The format of the date that is used to record date parameters of a decontamination/sterilization instance. Refer to User-defined Table 0653 – Date Format in Chapter 2C, Code Tables, for suggested values.
Definition: The number of the device (e.g., 01).
Definition: The name of the device associated with the device number in SCP-4 (e.g., VAC)
Definition: The manufacturer's designated model name.
Definition: The type of device, such as a steam sterilizer or gas sterilizer. Refer to User-defined Table 0657 – Device Type in Chapter 2C, Code Tables, for suggested values.
Definition: A code assigned to a device to indicate if the sterilization load is built in the sub-sterile area adjacent to an Operating Room or the Central Processing Department (Central Supply). Refer to User-defined Table 0659 – Lot Control in Chapter 2C, Code Tables, for suggested values.